Description

ECOdrive Constant Current LED Driver, 75W Max Power Output, Programmable Fixed 700-2100mA Output Current, Single Channel 2-55V Output Voltage, Analog 0-10V Dim-to Dark 1%, Auxiliary Port
eldoLED ECOdrive 75B-M1A0A 75W Programmable Constant Current LED Driver with Auxiliary Port (EC75B-M1A0A1)
The eldoLED ECOdrive 75B-M1A0A (Catalog Series EC75B-M1A0A) is a commercial-grade, programmable 75-watt constant current LED driver housed in a compact, side-feed metal enclosure. Engineered for architectural linear luminaires, recessed troffers, and connected lighting systems, this single-channel driver delivers a programmable fixed output current between 700mA and 2100mA across a 2–55V DC output voltage range, smooth analog 0–10V dim-to-dark (1%–100%) performance, and a configurable 15V–25V DC Auxiliary Port for powering sensors and wireless control nodes.
Custom Pre-Shipment Programming Options
Please specify your required programmable parameters prior to adding to cart (or match the values printed on your existing driver label):
- LED Output Current: Fixed value between 700mA and 2100mA (programmable in 1mA increments)
- Dimming Curve:
LIN(Linear),LOG(Logarithmic) (default if left blank),SNL(Soft Linear), orSQU(Square) - Minimum Dimming Level: Default
1.0%(default if left blank), adjustable in 0.1% increments - AUX Voltage:
25V(default if left blank); adjustable in 1V increments between 15V and 25V - AUX Standby:
ON(default if left blank) orOFF

Key Features & Performance Benefits
- Programmable Fixed Constant Current Output: Configurable between 700mA and 2100mA in exact 1mA increments across a wide 2–55V DC forward voltage range (75W maximum output), supporting both high-current COB arrays and linear LED boards.
- Hybrid HydraDrive 0–10V Dim-to-Dark (1%–100%): Delivers smooth, step-free analog dimming down to 1% with low-ripple, camera-friendly illumination and four selectable dimming curves (LIN, LOG, SNL, SQU).
- Configurable 15V–25V Low-Voltage Auxiliary Port: Integrated auxiliary DC output powers occupancy sensors, daylight photosensors, or wireless mesh control nodes directly from the driver, with programmable voltage (25V default, 1V increments between 15V and 25V) and standby ON/OFF behavior.
- Long Side-Feed Metal Enclosure: Low-profile elongated metal housing with side-entry terminals simplifies installation and wire routing inside linear architectural channels, cove strips, and commercial troffers.
Electrical & Physical Specifications
| Specification | Details |
|---|---|
| Model / Catalog Series | eldoLED ECOdrive 75B-M1A0A (EC75B-M1A0A1) |
| Maximum Output Power | 75 Watts |
| Programmable Output Current | Fixed value between 700mA and 2100mA (in 1mA increments) |
| Output Channels & Voltage Range | Single Channel (1 × 2–55V DC) |
| Control Protocol & Channels | Analog 0–10V Dim-to-Dark, 1%–100% (1 Control Channel) |
| Programmable Dimming Curves | LIN (Linear), LOG (Logarithmic – Default), SNL (Soft Linear), SQU (Square) |
| Minimum Dimming Level | 1.0% Default (programmable in 0.1% increments) |
| Auxiliary Port Voltage & Standby | 25V Default (1V steps between 15V and 25V) | AUX Standby: ON (Default) / OFF |
| Form Factor & Wire Feed | Long Metal Case with Side-Feed Terminals |
Common Custom Program Settings & Cross-Reference Catalog Numbers
Match your existing driver's Product Catalog Number, CI Code, or UPC from the table below when specifying your required custom programming:
| Product Catalog Number | CI Code | UPC |
|---|---|---|
| EC75B-M1A0A1 700MA LOG | *2502PU | 191848177747 |
| EC75B-M1A0A1 1050MA LIN | *292LH7 | 198934553676 |
| EC75B-M1A0A1 1160MA LIN 10.0MIN | *2672UA | 194994194323 |
| EC75B-M1A0A1 1250MA LIN | *278UH3 | 196182996566 |
| EC75B-M1A0A1 1250MA LIN 10.0MIN | *25769L | 193047961028 |
| EC75B-M1A0A1 1380MA LIN | *291F0U | 198934179333 |
| EC75B-M1A0A1 1380MA LIN 10.0MIN | *25769N | 193047961059 |
| EC75B-M1A0A1 1380MA LOG | *291F3A | 198934180117 |
| EC75B-M1A0A1 1400MA LIN | *261535 | 193048412765 |
| EC75B-M1A0A1 1400MA LIN J40 | *265857 | 193048839579 |
| EC75B-M1A0A1 1650MA LIN | *270V3R | 194995117109 |
| EC75B-M1A0A1 1650MA LOG | *291F3C | 198934180100 |
| EC75B-M1A0A1 1730MA LIN | *257S36 | 193048018189 |
| EC75B-M1A0A1 1730MA LIN 10.0MIN | *257S34 | 193048018141 |
| EC75B-M1A0A1 1750MA LIN | *273C5R | 194995712083 |
| EC75B-M1A0A1 2000MA LIN | *27530C | 196182103100 |
| EC75B-M1A0A1 2100MA LOG | *27701F | 196182550959 |
Frequently Asked Questions
What parameters can be programmed on the eldoLED ECOdrive 75B-M1A0A?
You can specify a fixed LED Output Current between 700mA and 2100mA (in 1mA increments), a Dimming Curve (LIN, LOG default, SNL, or SQU), a Minimum Dimming Level (1.0% default, adjustable in 0.1% steps), the AUX Voltage (25V default, adjustable from 15V to 25V in 1V increments), and AUX Standby mode (ON default or OFF).
How does the Auxiliary Port voltage adjustment on the 75B-M1A0A differ from the 75B-M1A0D?
The ECOdrive 75B-M1A0A uses 0-10V control interface while the 75B-M1A0D uses DALI-2 interface.
How do I find the right programming code for an existing fixture replacement?
Check the printed sticker on your existing eldoLED driver for the catalog string (such as EC75B-M1A0A1 1400MA LIN or 1250MA LIN 10.0MIN), CI code (e.g., *261535), or UPC, and reference the Common Custom Program Settings table above.
Spec Sheets
Download the official manufacturer documentation and specifications:
Additional Information
Our Part No.: |
BS46-EC75B-M1A0D |
Manufacturer Part No.: |
EC75B-M1A0D1 |
Brand: |
Acuity eldoLED ECOdrive |
Fixture Type: |
LED |
Driver Type: |
Constant-Current-Programmable |
Input Voltage: |
120-277V (Universal) |
Max Output Power: |
75W |
Max Output Current: |
2100mA |
Output Current Programmable Range: |
700-2100mA |
Max Output Voltage: |
55V |
Dimming: |
Analog (0-10V), LEDcode |
Location Rating: |
Dry/Damp |
Dimensions: |
6.87" L x 2.83" W x 1.16" H |
Product Data Sheet: |
See PDF Link Provided |
UL Class: |
Class 2 |
Features: |
Auxiliary Port |
Warranty: |
Manufacturer's |
Case Size: |
10 |