H3DT832GU310 (EC3T832GU310) Lutron Hi-lume 3D Dimming Ballast

LUTRON Hi-lume 3D Dimming Ballast, 120V/220V/240V/277V, Three F32T8 Linear and U-bend, 100% to 1% dimming, Programmed Start Ballast.

Discontinued by Manufacturer.  Retrofit to Lutron C-FLEX LED Lamp + Driver:

Step 1: Check wiring to identify the control type

Step 2: Select appropriate LED replacement to purchase - Click Below

For help retrofitting other Lutron fluorescent ballasts and lamps to LED, here is a cross reference tool provided by Lutron: Click Here to Download Lutron Ballast Cross Reference Tool

* CA Title 20 Compliant version note: If application has low-voltage sensors or controls attached to the ballast, then you may require an additional C5-BMF-2A module to convert a Hi-Lume into an EcoSystem component. Please review and order here EcoSystem C5-BMF-2A

H3DT832GU310 Specs

CEC Version Specs

Lutron 1% Dimming Electronic T8 Linear and U-bend Lamps

• Dimming Range: 100% to 0.7% measured relative light output (RLO) for T8
• UL LISTED (Class P, Type 1 Outdoor, Type CC)
• California Energy Commission Listed
• UL-listed, CSA certified
• Class P thermally protected
• Universal Voltage (120V/220V/240V/277V)
• G case: 9.5” (L) x 2.38” (W) x 1.0” (H)

CEC Title 20 Version Notes: If the ballast application does not require low-voltage sensors or controls attached to the EC5 ballasts, then use the CEC Title 20 Compliant version. If the ballast application requires low-voltage sensors or controls attached to the ballast, a C5-BMF-2A module (order separately) will need to be used with the CEC Title 20 compliant version. Confirm the additional device will fit in the fixture. See the wiring diagrams and dimensions on the link provided.