OTiEM30/UNV/1A0 DIM-1 L Optotronic (57403) Emergency LED Driver

OTi EM30/UNV/1A0 DIM-1 L OPTOTRONIC 30W Emergency Constant Current Back-up LED Driver, input voltage of 120-277V, 0-10V Dimming 1%-100%, output current of 150-1050mA (factory setting 700mA) programmable, output voltage 10-55VDC.  Battery Pack Sold Separately.

OTiEM30/UNV/1A0 DIM-L (57403) Spec Sheet

OSRAM Optotronic 30W Linear Emergency LED Driver

The OSRAM Optotronic Emergency Backup Driver allows a single fixture to be used for both regular and emergency (loss of power) operations. If power fails, this emergency driver switches to “Emergency Mode”. It will then operate the LED modules for 90 minutes at an output voltage in the range of 10-55 V. It can be used in conjunction with switched and unswitched fixture applications.

In the event of an AC power loss, the emergency functionality of the driver is activated and the emergency mode power is delivered through externally connected battery packs using a uniquely designed harness. The quick snap-on polarized battery harness substantially reduces wiring complexity and prevents mis-wiring

Features and Performance

• At least 90 minute operation in emergency mode with battery pack (sold separately - see below)
• Universal input voltage 120-277VAC
• Class 2 listed
• Operating Temperature Range 0 ̊C Through 55 ̊C
• Output Current Emergency Operation 150-1050mA (700mA factory set)
• Damp & Dry Rated
• Self Test: No
• Auxiliary Port: No

Compatable Battery Pack

• 57401 OT BAT 8x2- 3A0H- L
• 57402 OT BAT 4x4- 3A0H -C
• 57410 OT BAT 16x1 3A0H-L