OTiEM50/UNV/1A4 DIM-1/AUX/ST L Optotronic (57406) Emergency LED Driver - 50W Self Test

OTi EM50/UNV/1A4 DIM-1/AUX/ST L OPTOTRONIC 50W Emergency Back-up LED Driver with Self Test, Constant Current LED Driver has input voltage of 120-277V, 0-10V Dimming 1%-100%, output current of 400-1400mA (factory setting 1050mA) programmable, output voltage 10-55VDC, with auxiliary port.  Battery Pack Sold Separately.

OTiEM50/UNV/1A4 DIM-1/AUX/ST L Optotronic (57406) Spec Sheet

OSRAM Optotronic 50W Linear Emergency LED Driver with Auxiliary Port

The OSRAM Optotronic Emergency Backup Driver allows a single fixture to be used for both regular and emergency (loss of power) operations. If power fails, this emergency driver switches to “Emergency Mode”. It will then operate the LED modules for 90 minutes at an output voltage in the range of 10-55 V. It can be used in conjunction with switched and unswitched fixture applications.

In the event of an AC power loss, the emergency functionality of the driver is activated and the emergency mode power is delivered through externally connected battery packs using a uniquely designed harness. The quick snap-on polarized battery harness substantially reduces wiring complexity and prevents mis-wiring

Features and Performance

• At least 90 minute operation in emergency mode with battery pack (sold separately - see below)
• Universal input voltage 120-277VAC
• Class 2 listed
• Test switch and AC Power-On LED indicator for self-diagnostic test
• Operating Temperature Range 0 ̊C Through 55 ̊C
• Output Current (mA) Emergency Operation 400-1400mA (1050mA factory set)
• Damp & Dry Rated
• Self Test: Yes
• Auxiliary Port: Output Voltage (VDC) Aux Only 12/20/24V (configurable - 12V default factory setting)

Compatable Battery Pack

• 57401 OT BAT 8x2- 3A0H- L
• 57402 OT BAT 4x4- 3A0H -C
• 57410 OT BAT 16x1 3A0H-L