FCJS-ECO Lutron VIVE PowPak Wireless Control Module for EcoSystem Ballasts/LED Drivers

Lutron VIVE PowPak Wireless Lighting Load Controller for EcoSystem Ballasts and Drivers, Universal 120-277V Input, 1A Max Switching Load, 12V Operating Voltage, 25mA Operating Current, 1/2" Knock-out

Submit Quote Request

Lutron Vive PowPak Wireless Fixture Control for EcoSystem (FCJS-ECO)

The Lutron Vive PowPak FCJS-ECO is a highly versatile, radio-frequency (RF) wireless fixture control designed specifically to operate Lutron EcoSystem LED drivers and ballasts. Operating on Lutron's ultra-reliable Clear Connect RF Technology, this module communicates seamlessly with Pico remote controls, Radio Powr Savr sensors, and optional wired PowPak fixture sensors to deliver optimized, energy-efficient lighting control. It mounts conveniently to the exterior of a fixture or a standard junction box.

Core Specifications

• Operating Voltage: 120-277V
• Load Capacity: Controls up to 3 EcoSystem ballasts or drivers (functioning as one combined lighting zone) with a 1 A maximum switching capability.
• Standby Power: Ultra-low standby power consumption of < 1 W.
• RF Range: Wireless sensors and controls must be located within a 60 ft (18 m) line of sight, or 30 ft (9 m) through walls.
• System Compatibility: Fully compatible with the Lutron Vive hub for simple, web-based setup and monitoring from any Wi-Fi-enabled device.

Advanced Control Features

• Daylighting & Occupancy: Integrates with optional PowPak fixture sensors (for localized, out-of-the-box day lighting and passive infrared occupancy sensing) or Radio Powr Savr wireless sensors (for tuning, calibration, and large-area coverage).
• Customizable Trim: Features adjustable low-end and high-end trim settings.
• Power Failure Memory: If power is interrupted, the connected loads will automatically return to their previous level prior to the interruption.
• Device Limits: A single FCJS-ECO module can wirelessly connect with up to 10 Pico remote controls, 10 Radio Powr Savr occupancy sensors, and 1 Radio Powr Savr daylight sensor.

Frequently Asked Questions

Can this device be mounted inside a metal fixture?

No. The device must not be mounted inside a fixture or other metallic enclosure, as this can severely degrade wireless communications. It must be mounted on the exterior of a fixture, junction box, or marshalling box using the conduit nut.

What is the difference between this and the FCJS-010?

The FCJS-ECO is designed exclusively to connect to Lutron EcoSystem LED drivers or ballasts (via violet wires). The FCJS-010 is designed for standard 0-10V ballasts and drivers.

How do I group multiple fixtures for daylighting?

To have a row of fixtures dim up or down together in response to daylight (grouping), you must use a Radio Powr Savr daylight sensor rather than the standard wired PowPak fixture sensor.